www.berlon.com
434 Rubicon St.
Hustisford, WI 53034
Phone: (800) 899-3580
Email: Berlon@nconnect.net

Universal Mounts

Click Here for Universal Mount Prices

MPUF-1
MPUF-1
Standard Universal Mount. Fits most ASV, Bobcat, Case, Cat, Daewoo, Gehl, JCB, John Deere, Mustang, New Holland, Takeuchi, Thomas, and Volvo skidloaders.
MPUF-1HD
MPUF-1 with reinforcements on top bar and latch pin holes is used for severe applications that need a lot of breakout force (Ex: Heavy digging out, prying concrete, rocks, roots or prying tree stumps out of the ground).
MPUF-1HD
MPUF-2
MPUF-2
MPUF-1 with 1/4” backing plate used when you need more surface area to weld on (Ex: Needing a mount to weld onto something narrow like an auger drive unit).
MPUF-2HD
MPUF-1HD with 1/4” backing plate, used when more surface area is needed to weld your attachment (Ex: A hydraulic breaker).
 MPUF-2HD
MPUF-3
MPUF-3
Three hole mounting plate, needed for people who own Case 1835, 1838, 1840, with Quick-Tach mounts used for general skidloader applications. It will also fit 1845, XT Case and universal machines.
MPUF-4
MPUF-3 mounting plate with 1/4” backing plate that offers you more surface area to weld your attachments to (Ex: A truck snowplow frame).
 MPUF-4
MPUA
MPUA
Adjustable universal mounting plate that fits the same machines as the MPUF-1 with the same hole spacing. Why then? This mount is for the skidloader operator that understands that a bucket installed on a machine with the right mount height works better & is easier to use as tires wear. Ideally mount height should change. (Ex: If your machine has tracks that raise the machine; you can raise the mount. If you take the tracks off; you can lower the mount). Always keep mount on bucket at correct height thus allowing for 3” of vertical adjustment.
MPUF-5
Mount for universal machines with 60º back angle has holes to match a MPUF-1. The difference is that it changes the roll back of your attachment without losing capacity (Ex: Take a normal 70º back bucket and install a MPUF-5, you now have a 60º manure/slurry or grain/fertilizer bucket). Also fits Case 1845 & XT.
Remmember... What you gain in rollback you lose in dump angle!
 MPUF-5
MPQT-U
MPQT-U
Machine/boom side of skidloader/tractor converts old skidloader/tractor over to new Universal Skidloader Quick-Tach.
Berlon has designed our universal Quick-Tach so it reaches into the mounting plate further than other designs (Picture 2). The Berlon bottom latch pins, which are spring loaded, are designed with a taper (Picture 1) towards the machine. Therefore, when looking at the whole picture, it shows that as the mounting plate and the Quick- Tach wear, the unit will continue to stay tight.
Bottom Latch Pin Example
Example: An old 1845B Case
changed over to universal.
Old 1845B Case with Universal Mount

Mount Pricing

 

Part Number
Weight in Lbs
Suggested Retail Price
MPUF-1
45.0
$105.00
MPUF-1HD
61.0
$225.00
MPUF-2
120.0
$197.00
MPUF-2HD
142.0
$286.00
MPUF-3
56.0
$160.00
MPUF-4
125.0
$234.00
MPUF-5
56.0
$192.00
MPUA
171.0
$270.00
MPQT-U
147.0
$650.00

Berlon Industries 434 Rubicon St. Hustisford, WI 53034
Phone: (920) 349-3580 Fax: (920) 349-3081 Email: berlon@nconenct.net